Welcome to your source for quality audio online
Log In

Log In

Forgot Your Password?

Cart Subtotal: 0.00

TURBOSOUND iQ-10

Shipping: Usually within 24h

Regular Price: CHF785.00

CHF675.00

OR

Quick Overview

TURBOSOUND iQ-10
Click images to enlarge

2,500 Watt 2 Way 10" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking

The 2,500-Watt iQ10 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 10" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.

Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ10 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ10’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.

KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ10’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ10 features a mic/line switch and level control with signal present LED on each channel.

The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates.

The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ10 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Full specifications

Frequency Response 55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
Nominal Dispersion 90° H x 60° V @ -6 dB points
Maximum SPL 123 dB peak
Crossover type Active
Transducers 1 x 10" (256 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
Limiter Independent HF, LF, peak and rms
Maximum output power* 2,500 W
Type Class-D
Protection Short circuit, open circuit, thermal
Input A / B 2 x combo jack/XLR
Sensitivity Line +4 dBu, mic -22 dBu, switchable
Input impedance 20 kΩ unbalanced, 40 kΩ balanced
Maximum input level +21 dBur
Output A / B 2 x XLR Linked to input
Mix output XLR, balanced
Output impedance 100 Ω unbalanced, 200 Ω balanced
Ultranet input/link 2 x RJ45
Mains Supply Neutrik powerCON input 20A and link 15A
DSP Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER
Mixer section 2 x gain controls (channels A and B)
2 x Line/Mic switch
Factory EQ presets Positioning, Sound mode,
Sound modeling, FBQ
Display LCD 128 x 32, blue backlit
Delay 0 - 300 ms
Equalisation High and low shelving EQ
2 x parametric EQ
Limiter Zero attack input limiter
Presets 20 total presets, 19 user-definable
Crossover High Pass L-R 24 dB/oct
Protection Lock-out function for all settings
Digital processing  
A/D conversion 24-bit,44.1/48kHz sample rate
Converter type 24-bit,delta-sigma
System  
Signal 16 channels
Latency <0.9 ms
Frequency response 20 Hz to 20 kHz (+0 / -3 dB)
Dynamic range typical 92 dB
Cabling  
Cables Shielded CAT5
Cable length max. 246 ft / 75 m recommended
Power consumption 150 W @ 1⁄8 max power
Voltage (fuses)  
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Korea / China 220-240 V~, 50/60 Hz (T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V)
Dimensions HWD 526 x 324 x 316 mm(20.7 x 12.7 x 12.4")
Net weight 17.2 kg (38 lbs)
Construction Injection-moulded polypropylene enclosure
Finish Black painted
Grille Powder coated perforated steel
Flying hardware M10 x 3 points
Accessories IQ10-WB Steel wall bracket

Additional Information

Warranty 3 ans
Brand TURBOSOUND